Foscam camera and camera position

Forum All about Webcams, IP Camera's & Camera's (hardware, software, pan tilt zoom etc).

Moderator: Esteban

Post Reply
PietjeNL
Member
Member
Posts: 150
Joined: Sun May 30, 2010 8:47 am

Foscam camera and camera position

Post by PietjeNL »

Does anyone know how to set a foscam camera so it will remember some points?
So u can press a button and it goes to the front door or the living room door?
Cause now i can use it and move it with the interface but u cant set any presets.
bing
Member
Member
Posts: 94
Joined: Sun Jan 04, 2009 1:01 pm
Location: Netherlands

Re: Foscam camera and camera position

Post by bing »

PietjeNL wrote:Does anyone know how to set a foscam camera so it will remember some points?
So u can press a button and it goes to the front door or the living room door?
Cause now i can use it and move it with the interface but u cant set any presets.
I use the camera FI8908W. After the last firmware update I can use presets. Firmware retrieved from the manufacturer and not here in the Netherlands
Bastiaan
Senior Member
Senior Member
Posts: 1257
Joined: Sat May 24, 2008 11:36 am
Location: Netherlands
Contact:

Re: Foscam camera and camera position

Post by Bastiaan »

You need to use Internet Explorer to be able to see the presets.
Log in as admin and put the cam in the right position. At the bottom there will be a ´set´ button. When you click it, it will set the current position to the current preset number.
Change the position number, move the camera and press ´set´again.
You can set the camera to go to preset number on on startup.
Post Reply

Return to “Webcams & Camera Stuff Forum”