Alceto DVM 91 doorcam

Forum All about Webcams, IP Camera's & Camera's (hardware, software, pan tilt zoom etc).

Moderator: Esteban

Post Reply
phoenixb
Advanced Member
Advanced Member
Posts: 512
Joined: Thu Jul 23, 2009 1:00 pm
Location: Netherlands

Alceto DVM 91 doorcam

Post by phoenixb »

Hi,

Does anyone know if it's possible to made a connection (only for the video) to connect it to a pc or a other device that can convert video to Ethernet? from this doorcam -> Alecto DVM 91

Image
Grtz,
__________________
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: Alceto DVM 91 doorcam

Post by esschenk »

Hello,

Take a videoserver this is one of the cheapest

http://www.pimzos.nl/shop/aviosys/ipvid ... nector.php

Ed
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: Alceto DVM 91 doorcam

Post by Bwired »

not possible Ed, this is a wireless camera
User avatar
esschenk
Member
Member
Posts: 426
Joined: Sun Feb 17, 2008 10:34 pm
Location: Netherlands
Contact:

Re: Alceto DVM 91 doorcam

Post by esschenk »

Hello,

Sorry this is a rtfm

ed
Esteban
Forum Moderator
Forum Moderator
Posts: 677
Joined: Sun Jan 13, 2008 6:39 pm
Location: Netherlands

Re: Alceto DVM 91 doorcam

Post by Esteban »

Not exactly a solution, but it should be possible:
I've heard of it being done with cheap (cabled) video doorbells that send everything over two wires, although I have never seen it working myself. Although wireless, the video signal and 'ringing button' signal, from this doorbell, is sent (from the outdoor part) via a wire to the green connector connection (which supposedly also provides power to the camera) inside, before being converted into a wireless signal (by the indoor part).

So the video is in there somewhere and probably it is using pretty low-level tech. The trick is figuring out how to extract a composite(?)coaxial(?) video signal out of those two wires that you can pipe through an IP video encoder.

That said some other cam solution might be more cost/time effective.
phoenixb
Advanced Member
Advanced Member
Posts: 512
Joined: Thu Jul 23, 2009 1:00 pm
Location: Netherlands

Re: Alceto DVM 91 doorcam

Post by phoenixb »

Hi,

Thanks for the tips, i think that this is not really the solution.
I will search for a other solution :?
Grtz,
__________________
Post Reply

Return to “Webcams & Camera Stuff Forum”