Hello!
My little project - additional thermo-hygro sensor which is works with Oregon Scientific 1.0 protocol.
http://www.alyer.frihost.net/thrsensor.htm
Also, now i have finished an OS' THN128 and (BTHR968 or BTHR918) retranslator to UART.
It's based on Atmega8 and receives 433.92Mhz radio-packets from above described sensors and retranslates them to standart UART or RS232 if MAX232 IC is installed.
I will publish this project later at my homepage http://www.alyer.frihost.net/
Best regards!
wireless Thermo-Hygro sensor for Oregon Scientific
- Snelvuur
- Forum Moderator
- Posts: 3156
- Joined: Fri Apr 06, 2007 11:01 pm
- Location: Netherlands
- Contact:
wireless Thermo-Hygro sensor for Oregon Scientific
the THRSensor.dhtml seems an empty page though.
// Erik (binkey.nl)
// Erik (binkey.nl)
- Snelvuur
- Forum Moderator
- Posts: 3156
- Joined: Fri Apr 06, 2007 11:01 pm
- Location: Netherlands
- Contact:
wireless Thermo-Hygro sensor for Oregon Scientific
Works now.. nice work. Your very own thingy
// Erik (binkey.nl)
// Erik (binkey.nl)