PMIX35 Software

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
Tozz
Member
Member
Posts: 95
Joined: Sun Oct 28, 2007 5:20 pm
Location: Netherlands

PMIX35 Software

Post by Tozz »

I was wondering if anyone can supply me with the PMIX35 Analyzer Software.

I recently moved to a new house, and want to integrate X10 again. I found version 1.0.0.0 on the Internet, but this version doesn't seem to work properly on Windows 10. On Google I found images that there is atleast a version 2.0.0.2.p.
I was wondering if anyone can supply me that version or any other version later than 1.0.0.0.

Thanks
vincenttor
Member
Member
Posts: 344
Joined: Thu Jan 09, 2014 10:45 pm
Location: Netherlands

Re: PMIX35 Software

Post by vincenttor »

can't you use compatibility mode ?
Tozz
Member
Member
Posts: 95
Joined: Sun Oct 28, 2007 5:20 pm
Location: Netherlands

Re: PMIX35 Software

Post by Tozz »

I dont really know what the issue is. The PMIX software connects to the device, I see it uploading the firmware, and everything looks like its working.. However, I can't send any commands and I dont receive anything either.
I thought that perhaps the old version I am using is the culprit.
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: PMIX35 Software

Post by Bwired »

Tozz
Member
Member
Posts: 95
Joined: Sun Oct 28, 2007 5:20 pm
Location: Netherlands

Re: PMIX35 Software

Post by Tozz »

Its not really clear to me what you want to say by refering to that topic?

I am mostly interested in the latest version of the Analayzer. I'm sure I can resolve the issue with the PMIX not working when I invest enough time in it.
User avatar
Snelvuur
Forum Moderator
Forum Moderator
Posts: 3156
Joined: Fri Apr 06, 2007 11:01 pm
Location: Netherlands
Contact:

Re: PMIX35 Software

Post by Snelvuur »

// Erik (binkey.nl)
stefxx
Advanced Member
Advanced Member
Posts: 679
Joined: Fri Sep 12, 2008 2:26 pm
Location: Netherlands

Re: PMIX35 Software

Post by stefxx »

Tozz wrote:Its not really clear to me what you want to say by refering to that topic?
What bwired is saying:
- 1.1.6 is the latest version
- It is probably a driver issue that is giving you issues

And based on my own experience, both is true.
Tozz
Member
Member
Posts: 95
Joined: Sun Oct 28, 2007 5:20 pm
Location: Netherlands

Re: PMIX35 Software

Post by Tozz »

Thanks. I got it to work in a Windows Vista VM using VirtualBox and redirect the PMIX35 USB by setting the Vendor and Product IDs in VBox configuration.

If anyone is interested in the VM image, let me know.
stefxx
Advanced Member
Advanced Member
Posts: 679
Joined: Fri Sep 12, 2008 2:26 pm
Location: Netherlands

Re: PMIX35 Software

Post by stefxx »

It would have been a lot easier just to install the right drivers in Windows 10. But if this works for you, great!
Tozz
Member
Member
Posts: 95
Joined: Sun Oct 28, 2007 5:20 pm
Location: Netherlands

Re: PMIX35 Software

Post by Tozz »

I couldn't find a working driver. All I could find is the 6.x version, which installs fine but doesn't work with PMIX.
The 4.40 of 4.20 driver some people refer to isn't compatible with 64-bit Windows and thus couldn't be installed.
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”