PMIX35 Software

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.

PMIX35 Software

Postby Tozz » Thu Dec 15, 2016 10:07 am

I was wondering if anyone can supply me with the PMIX35 Analyzer Software.

I recently moved to a new house, and want to integrate X10 again. I found version 1.0.0.0 on the Internet, but this version doesn't seem to work properly on Windows 10. On Google I found images that there is atleast a version 2.0.0.2.p.
I was wondering if anyone can supply me that version or any other version later than 1.0.0.0.

Thanks
Tozz
Member
Member
 
Posts: 89
Joined: October 2007
Location: Netherlands

Re: PMIX35 Software

Postby vincenttor » Thu Dec 15, 2016 10:15 am

can't you use compatibility mode ?
vincenttor
Member
Member
 
Posts: 327
Joined: January 2014
Location: Netherlands

Re: PMIX35 Software

Postby Tozz » Thu Dec 15, 2016 10:18 am

I dont really know what the issue is. The PMIX software connects to the device, I see it uploading the firmware, and everything looks like its working.. However, I can't send any commands and I dont receive anything either.
I thought that perhaps the old version I am using is the culprit.
Tozz
Member
Member
 
Posts: 89
Joined: October 2007
Location: Netherlands

Re: PMIX35 Software

Postby Bwired » Thu Dec 15, 2016 1:31 pm

User avatar
Bwired
Administrator
Administrator
 
Posts: 5294
Joined: March 2006
Location: Netherlands

Re: PMIX35 Software

Postby Tozz » Thu Dec 15, 2016 1:33 pm

Its not really clear to me what you want to say by refering to that topic?

I am mostly interested in the latest version of the Analayzer. I'm sure I can resolve the issue with the PMIX not working when I invest enough time in it.
Tozz
Member
Member
 
Posts: 89
Joined: October 2007
Location: Netherlands

Re: PMIX35 Software

Postby Snelvuur » Sun Dec 18, 2016 9:11 am

// Erik (binkey.nl)
User avatar
Snelvuur
Forum Moderator
Forum Moderator
 
Posts: 3155
Joined: April 2007
Location: Netherlands

Re: PMIX35 Software

Postby stefxx » Sun Dec 18, 2016 9:27 am

Tozz wrote:Its not really clear to me what you want to say by refering to that topic?


What bwired is saying:
- 1.1.6 is the latest version
- It is probably a driver issue that is giving you issues

And based on my own experience, both is true.
User avatar
stefxx
Advanced Member
Advanced Member
 
Posts: 646
Joined: September 2008
Location: Netherlands

Re: PMIX35 Software

Postby Tozz » Sun Dec 18, 2016 3:52 pm

Thanks. I got it to work in a Windows Vista VM using VirtualBox and redirect the PMIX35 USB by setting the Vendor and Product IDs in VBox configuration.

If anyone is interested in the VM image, let me know.
Tozz
Member
Member
 
Posts: 89
Joined: October 2007
Location: Netherlands

Re: PMIX35 Software

Postby stefxx » Sun Dec 18, 2016 3:53 pm

It would have been a lot easier just to install the right drivers in Windows 10. But if this works for you, great!
User avatar
stefxx
Advanced Member
Advanced Member
 
Posts: 646
Joined: September 2008
Location: Netherlands

Re: PMIX35 Software

Postby Tozz » Mon Dec 19, 2016 10:01 am

I couldn't find a working driver. All I could find is the 6.x version, which installs fine but doesn't work with PMIX.
The 4.40 of 4.20 driver some people refer to isn't compatible with 64-bit Windows and thus couldn't be installed.
Tozz
Member
Member
 
Posts: 89
Joined: October 2007
Location: Netherlands


Return to X10, A10 Xanura Marmitek Forum

Who is online

Users browsing this forum: No registered users and 3 guests

cron