PMIX35 problem

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
User avatar
Wima
Member
Member
Posts: 127
Joined: Sun Aug 16, 2009 11:05 am
Location: Netherlands

PMIX35 problem

Post by Wima »

Using the PMIX35 for some time now, never got any problems with it.
Last night however it did not function. The connection from HS3 to the com port are fine no errors.
In the log from HS3 the commands are send oke, but the data LED on the PMIX are not flashing (sending data)
Did already change the USB cable but still no sign of a data sending on to the powerline.

Is the a way to test if the PMIX is stil working? Is there a way to reset?
Don't know what to do, nothing is responding. Did not made any changes to the system.

Has someone an idea what to do?

Wil
even the genious ask questions
stefxx
Advanced Member
Advanced Member
Posts: 679
Joined: Fri Sep 12, 2008 2:26 pm
Location: Netherlands

Re: PMIX 35 problem

Post by stefxx »

Is the status LED still on? if not:

Hook it up to a Windows machine, make sure you have the correct drivers installed and start the PMIX35 network analyzer. It might bring back the PMIX35. I was able to bring several PMIX35 back using this simple procedure. It will try to reflash the firmware (at least, that is what it will say) and after that the status led should be on again and the PMIX35 should work again.
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: PMIX 35 problem

Post by Bwired »

yes thats the only way to 'good' check it
User avatar
Wima
Member
Member
Posts: 127
Joined: Sun Aug 16, 2009 11:05 am
Location: Netherlands

Re: PMIX 35 problem

Post by Wima »

LED is indeed OFF, I wil try it and let you know, Thanks

Wil
even the genious ask questions
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: PMIX 35 problem

Post by Bwired »

be aware that if you use the initial cd, you could end up with old firmware
i have the same problem here and nobody knows the exact firmware anymore :(
User avatar
Wima
Member
Member
Posts: 127
Joined: Sun Aug 16, 2009 11:05 am
Location: Netherlands

Re: PMIX35 problem

Post by Wima »

Tried different times, it indeed is updating firmware but after 10 times I gave up.
So it did not work. Data LED is stil not flashing in order to send data.

Wil contact the store tomorrow what to do. Thanks anyway.
even the genious ask questions
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”