all units OFF

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
drmacchi
Advanced Member
Advanced Member
Posts: 827
Joined: Wed Aug 08, 2007 5:48 pm
Location: Italy

all units OFF

Post by drmacchi »

Hi all, sometimes (random) my x10 domotica system receives (from ??) a X10 ALL UNITS OFF command. I see it because my lights are turned off and i can monitor it from HS loog. Any ideas to understand its origine and how to prevent it?
Thanks
drmacchi
Advanced Member
Advanced Member
Posts: 827
Joined: Wed Aug 08, 2007 5:48 pm
Location: Italy

Re: all units OFF

Post by drmacchi »

I thinks it comes from the rain sensor that commands an x10 device at A8 , but i found this

28/02/2010 13.13.54 X10 Received A8 (PIANO INFERIORE GIARDINO ESTERNO Motori antipioggia) A All Units Off
28/02/2010 13.13.54 Debug TI103 Raw Poll: 47634.78 - $<2800!AAUF A0831#
28/02/2010 13.13.55 Debug TI103 Raw Poll: 47635.09 - $<2800!A08F4#
28/02/2010 13.13.55 Debug TI103 Raw Poll: 47635.41 - $<2800! AON49#
28/02/2010 13.13.55 Debug TI103 Callback: Dev= A8, HC= A, Cmd= 2, 0/0

what is to command to ignore the "all units off" issued from the rain sensor?
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”