X10 control of dimmable LED strips

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
DrNik
Starting Member
Starting Member
Posts: 2
Joined: Mon Mar 29, 2010 11:39 am

X10 control of dimmable LED strips

Post by DrNik »

Dear group,

I know this topic has been touched on before, but I haven't found any clear answer to this. I've just installed some dimmable LED strips, but these are 12v DC dimmers which sit "behind" the transfo... The dimmer itself is controlled by a potential-free switch (click once to turn on/off, hold for dim).

Is there any way to control this with a Marmitek/Xanura solution (I have all micromodules for other lighting). I know there are references to a mains-dimmable transfo in some other posts, but I think the allowed W is too low.
My dimmer also has an 0-10V analog interface....

Any thoughts and comments are very much appreciated,
best regards,
Nik.
Top
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”