Hi guys,
I'm in the last phase of completimng a 8 monthn long rebuild of our new house.
The first room to complete will be the attic, which will be the master bedroom.
I created 3 groups of ceiling spots and I want to control these with x10.
I created a technical space in one corner of the attic, where the 3 black switch?-wires of the 3 lightgroups end up.
In this corner I placed 3 LM12W dimming modules and a LM13 tranceiver module. I want to control the lights with 2 SS13 flat wall-switches (one against the wall, one near our bed)
This is how I thought I should wire it (zie attachment):
Eric
The problem is that none of the groups work when I try to swtch them on with the SS13... I tried attaching a regular lightbulb, but nothing....
The LM13 does work on code A1, so there is nothing wrong with the SS13
PLZ help!
Regards,
Did I wire this correctly? Please help....
Re: Did I wire this correctly? Please help....
Eric,
theoretically it must work is described.
Only problem can be the noise on your power-line.
theoretically it must work is described.
Only problem can be the noise on your power-line.
Enver Tanriverdi | http://blog.tane.nl