LMM21 icw. Jung 2-vlaks impulsdrukker?

Forum about Xanura, Eaton Holec and Marmitek and other brand X10 and A10 devices.
Post Reply
rovinge
Member
Member
Posts: 53
Joined: Wed Oct 05, 2011 10:06 am
Location: The Netherlands

LMM21 icw. Jung 2-vlaks impulsdrukker?

Post by rovinge »

I appreciate your help for the following.

I want to control a Marmitek LMM21 using a Jung Impulsdrukker (type531, with 1-polig maakcontact).

How do I need to connect the black/yellow/red wires from the micromodule to the Jung switch?

I have tried every possible combination connecting the wires to the switch, but with no success. I can get the light turn on/off, but I cannot dim or get it brighter.

Roel
Attachments
Jung Impulsdrukker.JPG
Jung Impulsdrukker.JPG (15.85 KiB) Viewed 6767 times
LMM21-2[1].gif
LMM21-2[1].gif (34.49 KiB) Viewed 6767 times
User avatar
Peterpc
Member
Member
Posts: 217
Joined: Sun Sep 30, 2007 12:54 pm
Location: Netherlands
Contact:

Re: LMM21 icw. Jung 2-vlaks impulsdrukker?

Post by Peterpc »

If you want to dim the light, keep the switch pressed for a few seconds.
Peter
http://www.pcgsm.nl/
rovinge
Member
Member
Posts: 53
Joined: Wed Oct 05, 2011 10:06 am
Location: The Netherlands

Re: LMM21 icw. Jung 2-vlaks impulsdrukker?

Post by rovinge »

I have got it working

On/off and dim/bright does work, but not in a way I want to have it working.

Only the top half my switch controls this all, the bottom half of the swith does nothing. By keep pressing the top half of the switch, the light cycles through dim and bright.

What I want is
- the top half of the witch turns the lamp on (single touch) and/or brightens the lamp (keep pressed)
- the bottom half of the witch turns the lamp off (single touch) and/or dims the lamp (keep pressed)

So your feedback is still appreciated.

Roel
User avatar
Peterpc
Member
Member
Posts: 217
Joined: Sun Sep 30, 2007 12:54 pm
Location: Netherlands
Contact:

Re: LMM21 icw. Jung 2-vlaks impulsdrukker?

Post by Peterpc »

That is only possible with a lwm1p micro module.
Peter
http://www.pcgsm.nl/
rovinge
Member
Member
Posts: 53
Joined: Wed Oct 05, 2011 10:06 am
Location: The Netherlands

Re: LMM21 icw. Jung 2-vlaks impulsdrukker?

Post by rovinge »

I have now replaced it by a DAIX12.

Thanks for all the replies.

Roel
Post Reply

Return to “X10, A10 Xanura Marmitek Forum”