Door / Window open/closed sensor

Forum about 1-Wire devices.
Post Reply
Markw
Starting Member
Starting Member
Posts: 2
Joined: Fri Jan 02, 2009 6:27 pm
Location: United States

Door / Window open/closed sensor

Post by Markw »

What would be a good one-wire sensor that I could use to sense if a door or window has been opened? I see somebody else just recently asked this in a different way but no responses yet.

Thanks for looking/answering.

Mark
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

Door / Window open/closed sensor

Post by TANE »

Hi Mark,
Welcome to this forum

Why not use a wireless version?
I'm using Visonic MCT 302-T
They are small
Will detect sabotage.
You can also use them for your security system (if you have Visonic)
easy to install
No need for any wire.

[img]uploaded/Chak/200912212451_MCT302.jpg[/img]
Markw
Starting Member
Starting Member
Posts: 2
Joined: Fri Jan 02, 2009 6:27 pm
Location: United States

Door / Window open/closed sensor

Post by Markw »

Hi Chak,

Thank you for the welcome aboard and suggestion.

Next question is how does the receiver interface into the home automation system? I'm looking at the doors/windows section on the home page at bwired.nl and thought that that would be a neat feature to have.

Any suggestions are always welcome!!

Thank you again Mark
User avatar
Willem4ever
Global Moderator
Global Moderator
Posts: 805
Joined: Mon Oct 30, 2006 3:48 pm
Location: Uithoorn / Netherlands

Door / Window open/closed sensor

Post by Willem4ever »

You could use a rfxcom interface with e.g homeseer. (see www.rfxcom.com for further details)
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

Door / Window open/closed sensor

Post by TANE »

Mark,
Pieter (Bwired) is also using Visonic door/window sensors.

Best solution for HA interface with Visonic and lot of other devices that work with RF is Rfxcom.
for more info
www.rfxcom.com
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

Door / Window open/closed sensor

Post by TANE »

here you will find some Visonic modules for the US market
including door window sensors for $28

http://stores.ebay.com/homesecurity4less
Esteban
Forum Moderator
Forum Moderator
Posts: 677
Joined: Sun Jan 13, 2008 6:39 pm
Location: Netherlands

Door / Window open/closed sensor

Post by Esteban »

Hi Mark,

Be sure to buy the right RFXcom receiver as there are several models and the frequencies used are different in the States than the EU were most of us are based.

If you'd want something cheaper you could do the same with a couple of X10 DS10a's and a 310Mhz RFXcom receiver. X10 is very cheap in the US a 3-pack of DS10a could be yours for 8.56$. A single one of those costs more than 50$ over here!

Some will argue that Visonic is more reliable but I'll leave that discussion in the middle ;) It all depends on what you're planning on doing
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Door / Window open/closed sensor

Post by Bwired »

Be careful To pick the right Visonic receiver as well if you choose visonic.
And yes I think the Visonic doorsensor is far more superior then the DS sensors.
Darrenw
Starting Member
Starting Member
Posts: 7
Joined: Thu Nov 12, 2009 4:21 pm
Location: United Kingdom

Door / Window open/closed sensor

Post by Darrenw »

Hi All
What would be the cheapest way to do this in the UK? I want doors and windows sensored up so I would know if anything was opened/closed by some visual representation on the computer. Please bare in mind I have no knowledge about any sort of HA and would be starting from scratch.
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Door / Window open/closed sensor

Post by Bwired »

I think it's all above here, the cheap and the less cheap (better) one!

<hr noshade size="1"><font size="1">Pieter Knuvers
http://www.bwired.nl <i>Online House in the netherlands. Domotica, Home Automation.</i></font id="size1">
j.hoekstra
Member
Member
Posts: 255
Joined: Thu Jun 25, 2009 2:09 pm
Location: Enschede, The Netherlands

Door / Window open/closed sensor

Post by j.hoekstra »

As far as I can tell the MCT-302 of Visonica is also sold as BT door/windows sensors, sometimes cheaper than the Visonic branded...
Darrenw
Starting Member
Starting Member
Posts: 7
Joined: Thu Nov 12, 2009 4:21 pm
Location: United Kingdom

Door / Window open/closed sensor

Post by Darrenw »

So basically I want some Visonic sensors (or BT door/windows sensors) and a visonic reciever if available? what about interfacing it with a pc?
Post Reply

Return to “1-Wire Forum”