1-wire on the RPi

Forum about 1-Wire devices.
Post Reply
Dylantje
Member
Member
Posts: 180
Joined: Sat Jan 05, 2013 9:46 pm

1-wire on the RPi

Post by Dylantje »

I do not now where and on witch pins i must make the 1-wire sensors.
Is there some one that will explane to me how i kan make more 1-wire device to my RPi.
Or a link where i can find the right pin out, and the good way to make the 1-wire working, etc. :D :D :mrgreen: :mrgreen:


Thanks!!!
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

Re: 1-wire on the RPi

Post by Bwired »

Hi Dylan
Again, did you know there is google?
Enough hits the first 1 explains it exactly how to setup
Good luck
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: 1-wire on the RPi

Post by raymonvdm »

Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Dylantje
Member
Member
Posts: 180
Joined: Sat Jan 05, 2013 9:46 pm

Re: 1-wire on the RPi

Post by Dylantje »

THANKS!!!!!

This is what i am looking for.
Dylantje
Member
Member
Posts: 180
Joined: Sat Jan 05, 2013 9:46 pm

Re: 1-wire on the RPi

Post by Dylantje »

Only how do i get the unic code of the Sensors?
And the code: sudo modprobe w1-gpio is not working, or do i have first the sensor on it?
Can i make in this string the BMP085 on the same way?
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: 1-wire on the RPi

Post by raymonvdm »

I don`t think it can be connected in the same way. I don`t think it is an 1-wire device. However you can connect it to another gpio pin there are several available on the Pi
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

Re: 1-wire on the RPi

Post by Digit »

BMP085 talks i2c. The Raspberry Pi can talk i2c too after some modifications.
See http://blog.hekkers.net/2013/09/14/stai ... i-and-i2c/
Dylantje
Member
Member
Posts: 180
Joined: Sat Jan 05, 2013 9:46 pm

Re: 1-wire on the RPi

Post by Dylantje »

@ All,
It looks like that i bin there allmost..
1 question how do i get the uniqe id, from all the different sensors? Do I get this when i do this tutoriol: cl.cam.ac.uk/projects/raspberrypi/tutor ... mperature/
Is that id for always? or is the sensor evertime get a new id when i connect it to the Rpi?
How do i mark this sensor in Domoticz...? Or in my documentation.?

What is the limit of sensors?
domoticdream
Starting Member
Starting Member
Posts: 1
Joined: Tue May 07, 2013 6:14 am

Re: 1-wire on the RPi

Post by domoticdream »

I would like to learn a new application for home automation that uses 1-wire sensors (DS18B20, ds2438) Modbus instruments. domotic-dream is an opensource software like LAMP distributed for free under the GNU GPL3. domotic-dream preinstalled on raspberry and can be downloaded from sourceforge. anyone who wants to use or develop other plugins, to connect to http://www.domotic-dream.com or http://sourceforge.net/projects/domotic ... =directory
Post Reply

Return to “1-Wire Forum”