Experiences with automatic (front)doorlocks

Forum with questions and discussions about security or security devices like Marmitek, Elro Elk (other then Visonic)

Re: Experiences with automatic (front)doorlocks

Postby raymonvdm » Mon Apr 07, 2014 8:55 pm

You need to have a cable to the lock, which is possible using different routes. I`have seen doosr where there is a hole drilled from the top of the door to the position of the lock. There are also doors where the kabel comes out on the inside right behind the lock and goes true a cablecondutor

U can also use a electric (slot kom) to open and close the door (this is normlay done on doors located inside a building)

These locks are arround 700 euro`s i think, in that case an Nemef Radaris lock is not that expensive after all :D (Because it it battery operated as far is i can tell)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Senior Member
Senior Member
Posts: 1146
Joined: December 2011

Re: Experiences with automatic (front)doorlocks

Postby olof » Tue Apr 08, 2014 9:37 am

ok thanks for the info

Posts: 281
Joined: August 2010
Location: Netherlands


Return to Security & Alarmpanels Forum

Who is online

Users browsing this forum: No registered users and 1 guest