Page 1 of 6

Availabilty Forum on Nitroserve (ervaringen Nitroserve)

Posted: Thu Sep 30, 2010 9:18 pm
by Bwired
Hi Forum,

I get more and more personal mails about the availabilty and performance of the forum
The forum is lately being slow or worse not avalaible at all for some time.

Please respond to this topic as you are expericing problems as of now
perhaps a screenshot will be handy also.

I asked Nitroserve whats going on but they have no problems, they tell me.
The forum does not have to be very fast but within normal parameters.
As for a couple of weeks I think its not that good anymore, before that it was OK for a long while.

Í'm not making any adjustments so thats not the cause.

BTW: The only one who is not allowed to responde is Eric :D
Ervaringen Nitroserve hosting http://www.nitroserve.nl

Thanks
Pieter

Re: Availabilty Forum on Nitroserve

Posted: Thu Sep 30, 2010 9:37 pm
by Noel
Yesterday (or was it the day before yesterday) I had problems accessing the forum. (really slow)
Is a free siteuptime account something for you?
More info @ www.siteuptime.com

Re: Availabilty Forum on Nitroserve

Posted: Thu Sep 30, 2010 9:52 pm
by Digit
Forum is definitely slow, very slow lately.
Yesterday i had some 500 (not as amount, but as.. wel,, you know :) ) errors.
I don't send mails about it cause I know you're always on top of it and because it's a 3rd party that has to fix it.
But I'll make some screen-shots when it happens again!

Re: Availabilty Forum on Nitroserve

Posted: Thu Sep 30, 2010 10:34 pm
by korsteed
Today the forum was a few times not available (so slow that I got a timeout).
I tried to access this page: http://www.domoticaforum.eu/search.php? ... d=newposts
When I tried again a few minutes later I saw the message below (both in Internet Explorer and in Chrome).
5 minutes later the forum was responding normally.

I think a service like siteuptime gives you a good idea.
For my own website I use a free monitoring service from http://www.pingdom.com/.
Monitoring of 1 page is free. They monitor both availability and response time from several places around the world and when the site is down you get an e-mail.

Error message:
Image

Re: Availabilty Forum on Nitroserve

Posted: Fri Oct 01, 2010 3:18 pm
by Bwired
Good idea, i will start with monitoring the mainpage
Thanks guys
I get the 500 error also a lot

Re: Availabilty Forum on Nitroserve

Posted: Fri Oct 01, 2010 9:16 pm
by mhn
I just got a 500.

Refreshed and no problem.
Klippebord-1.jpg
Klippebord-1.jpg (169.85 KiB) Viewed 20977 times

Re: Availabilty Forum on Nitroserve

Posted: Sat Oct 02, 2010 12:20 pm
by drmacchi
I've had error 500 many times , in last days, but when i don't have it , forum is not slow.
Lorenzo

Re: Availabilty Forum on Nitroserve

Posted: Sat Oct 02, 2010 2:20 pm
by korsteed
Other bulletin-boards at Nitroserve seem to have the same problem: cbforum.nl/viewtopic.php?f=32&t=316 ... ;start=225
(on cluster.nitroserve.nl)

Re: Availabilty Forum on Nitroserve

Posted: Sat Oct 02, 2010 4:32 pm
by Bwired
I mailed Nitroserve again to investigate.
Please report all problems here as Nitroserve has this link too.
Hopefully they are able to solve this.
thanks all!

Re: Availabilty Forum on Nitroserve

Posted: Mon Oct 04, 2010 10:37 am
by Bwired
All

Nitroserve has asked us to check the node when the problems occur.
This can be done with the following link:

http://84.243.195.130/node.php

Nitroserve is investigating the problem.
Thanks.Pieter

Re: Availabilty Forum on Nitroserve

Posted: Mon Oct 04, 2010 12:49 pm
by Snelvuur
I know your idea's about it, but i'll say it again. I can host your site for free, with better speeds. Full access (even with ticket support) one of the reasons i dont check the forum so often anymore more is it just takes to much time.. (just right now, again it took too long for my sake to open up the main site, and then the new posts took also a long time. NODE3)

Re: Availabilty Forum on Nitroserve

Posted: Wed Oct 06, 2010 10:48 am
by yjb
At this moment very slow. Every page takes about 2-5 seconds to load.

Node2

Posted: Wed Oct 06, 2010 11:28 am
by Rebel
Same here, good wifi connection, bad performance sometimes.

Re: Availabilty Forum on Nitroserve

Posted: Wed Oct 06, 2010 1:32 pm
by Bwired
Hi Guys,
I just been informed by Nitroserve that they replaced the loadbalancer.
The performance should be much better now.
If I try, its very fast at this moment.

Re: Availabilty Forum on Nitroserve

Posted: Thu Oct 07, 2010 12:14 pm
by mhn
Today 11.30 (Danish time) first slow, then no connection.

Forums says posted 11.14, my time says 12.14, hence then problem was 10.30 forum time.

Regards
Morten