Device status - Last Change

Homeseer Forum in het Nederlands (DUTCH forum)

Moderator: Ruud

Device status - Last Change

Postby raymonvdm » Tue May 09, 2017 1:52 pm

I`m having some issues with the "Last Change" values in HomeSeer which seem to causing event issues


The following event is running once every 15 minutes

Code: Select all

IF   The event will automatically trigger every 15m, 0s
AND IF 1e verdieping Douche Ventilatie has been On for at least 2h,45m,0s
AND IF 1e verdieping Douche Douchelamp has been Off for at least 15m,0s
Then Set Deviec 1e verdieping Douche Ventilatie to Off
Then Send Email about it



The device Douche Ventilatie is powered on at 07:00 today, but the last status change is Today 14:44:28 so i don`t think the "has been On for at least 2h,45m,0s" state wil ever be true

I think this issue occurs as soon as en event is active for the device (I also see this same issue with an opentherm device value)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
 
Posts: 1117
Joined: December 2011

Re: Device status - Last Change

Postby raymonvdm » Tue May 09, 2017 2:16 pm

Also posted on the HomeSeer forum and it looks like it`s related to the polling interval of the specific node :cry:
https://forums.homeseer.com/showthread. ... ost1305538
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
 
Posts: 1117
Joined: December 2011


Return to Homeseer algemeen Forum

Who is online

Users browsing this forum: No registered users and 2 guests