Fibaro modules geven Device Unkown en Warnings bij toevoegen
Posted: Sun Oct 02, 2016 4:19 pm
Sinds kort heb ik een aantal Fibaro modules toegevoegd aan mijn HS3 installatie. Wat opvalt is dat bij het toevoegen van een node Homeseer al een Warning geeft. Dit heb ik zowel bij de Aeon Labs usb stick als die van Zwave-Me. De warning verschilt wel.
Wanneer ik de fibaro module bedien (lokaal of via HS3) dan veranderd de waarde in Unkown.
Stukje log
Moet ik na het simpelweg toevoegen van een Node nog iets doen aan de settings om alles goed te laten werken ?
Code: Select all
Getting Z-Wave Plus Association Group Information (5 groups) from Node 2...
Z-Wave Plus Association Root Group Information For Group 5 retrieved successfully from Node 2 Group Name=Dimmer(S2), Profile Is General:Reserved And the group hosts 1 Event commands.
Warning: Node 2, EndPoint=1 Multilevel Sensor Report was not received (B) - the child device will NOT be configured properly.
Warning: Node 2 did not respond to the Notification Supported request.
Root Node Device Node 2 Z-Wave Fibaro Switch Multilevel was created for node 2 on network F64D0BF5
Z-Wave Me: Adding association for Z-Wave device Node 2 Z-Wave Fibaro Switch Multilevel (Node 2, Group 1, Endpoint 1) to HomeSeer
Z-Wave Me: Adding association for Z-Wave device Node 2 Z-Wave Fibaro Switch Multilevel (Node 2, Group 2, Endpoint 2) to HomeSeer
Code: Select all
Getting Z-Wave Plus Association Group Information (5 groups) from Node 14...
Z-Wave Plus Association Root Group Information For Group 3 retrieved successfully from Node 14 Group Name=Dimmer(S1), Profile Is General:Reserved And the group hosts 1 Event commands.
Z-Wave Plus Association Root Group Information For Group 4 retrieved successfully from Node 14 Group Name=On/Off(S2), Profile Is General:Reserved And the group hosts 1 Event commands.
Z-Wave Plus Association Root Group Information For Group 5 retrieved successfully from Node 14 Group Name=Dimmer(S2), Profile Is General:Reserved And the group hosts 1 Event commands.
Warning: Node 14, EndPoint=1 Multilevel Sensor Report was not received (B) - the child device will NOT be configured properly.
Warning: Node 14 did not respond to the Notification Supported request.
Root Node Device Node 14 Z-Wave Fibaro Switch Multilevel was created for node 14 on network E86BE373
Aeon Labs: Adding association for Z-Wave device Node 14 Z-Wave Fibaro Switch Multilevel (Node 14, Group 1, Endpoint 1) to HomeSeer
Aeon Labs: Adding association for Z-Wave device Node 14 Z-Wave Fibaro Switch Multilevel (Node 14, Group 2, Endpoint 2) to HomeSeer
Stukje log
Code: Select all
okt-02 16:14:20 Change Node 14 Z-Wave Switch Multilevel 2 changed from 99 to 99 (E86BE373-014-Q109)
okt-02 16:14:20 Z-Wave Device: Node 14 Z-Wave Switch Multilevel 2 Set to INVALID VALUE
okt-02 16:14:20 Z-Wave ApplicationCommandHandler from node 14 HANDLING: COMMAND_CLASS_MULTI_CHANNEL_V2 Frame(7)=13
okt-02 16:14:20 Z-Wave ApplicationCommandHandler from node 14 HANDLING: COMMAND_CLASS_SECURITY Frame(7)=129
okt-02 16:14:20 Z-Wave Aeon Labs: Sending to node 14 (Undefined) CC=COMMAND_CLASS_SECURITY
okt-02 16:14:20 Z-Wave ApplicationCommandHandler from node 14 HANDLING: COMMAND_CLASS_SECURITY Frame(7)=64
okt-02 16:14:19 Change Node 14 Z-Wave Switch Multilevel 2 changed from 0 to 99 (E86BE373-014-Q109)
okt-02 16:14:19 Z-Wave ApplicationCommandHandler from node 14 HANDLING: COMMAND_CLASS_SECURITY Frame(7)=128
okt-02 16:14:18 Z-Wave Aeon Labs: Sending to node 14 (Undefined) CC=COMMAND_CLASS_SECURITY
okt-02 16:14:18 Z-Wave Aeon Labs: Sending to node 14 (Secure) CC=COMMAND_CLASS_MULTI_CHANNEL_V2
okt-02 16:14:18 Device Control Device: Node 14 Z-Wave Switch Multilevel 2 to On (99) by/from: CAPI Control Handler