Device status - Last Change

Homeseer Forum in het Nederlands (DUTCH forum)

Moderator: Ruud

Post Reply
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Device status - Last Change

Post by raymonvdm »

I`m having some issues with the "Last Change" values in HomeSeer which seem to causing event issues


The following event is running once every 15 minutes

Code: Select all


IF	The event will automatically trigger every 15m, 0s
AND IF 1e verdieping Douche Ventilatie has been On for at least 2h,45m,0s
AND IF 1e verdieping Douche Douchelamp has been Off for at least 15m,0s
Then Set Deviec 1e verdieping Douche Ventilatie to Off
Then Send Email about it

The device Douche Ventilatie is powered on at 07:00 today, but the last status change is Today 14:44:28 so i don`t think the "has been On for at least 2h,45m,0s" state wil ever be true

I think this issue occurs as soon as en event is active for the device (I also see this same issue with an opentherm device value)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Device status - Last Change

Post by raymonvdm »

Also posted on the HomeSeer forum and it looks like it`s related to the polling interval of the specific node :cry:
https://forums.homeseer.com/showthread. ... ost1305538
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Post Reply

Return to “Homeseer algemeen Forum”