Hi,
I`m trying to create an HomeSeer event "manual with condition" but it does not seem to be working.
- Created event to switch on a device (A1) when the event is manual trigged
- Added a dependency to the event (another device A2) needs to be on)
- When i run the event the device A1 is always turned on
Is there anyone who can try this to see what is going wrong ?
Note:
When i change the dependency to time after 11:00 en before 11:59 the device A1 is stil switched on so dependency`s for a manual triggered event are not working
Note2:
I have found a look a like topic but it is from 2009
http://www.domoticaforum.eu/viewtopic.php?t=3233
HomeSeer event "manual with condition" not working?
Moderator: Ruud
HomeSeer event "manual with condition" not working?
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: HomeSeer event "manual with condition" not working?
One remark here
Don't use A1 because that one is often used as default for devices such as the motion detectors MS13 when they come online/new batteries or as default. Also A1 is often used as device code for Lights ALL ON/OFF
Don't use A1 because that one is often used as default for devices such as the motion detectors MS13 when they come online/new batteries or as default. Also A1 is often used as device code for Lights ALL ON/OFF
Bram
Hi, you can only use 'manipual with condition' when you trigger it from another event. Then it will work with the condition. Why? I don't know, but this is the way
Be sure to use the correct setting in the event you use to trigger the 'manual with conditions event'. It's a tag in the script with match conditions or something. Let us know if you can get it to work or need some more help.
Be sure to use the correct setting in the event you use to trigger the 'manual with conditions event'. It's a tag in the script with match conditions or something. Let us know if you can get it to work or need some more help.
Re: HomeSeer event "manual with condition" not working?
I created a additional event which triggers the actual event, so it is working now
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s