RFXCOM find remote signal Tumoco

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

RFXCOM find remote signal Tumoco

Postby doludizgin » Mon Jul 02, 2018 7:55 am

Hi,

I have setup my RFXCOM on my Pi. It works with the most of my 433mhz switches.

My window shutters are also on the 433mhz (i can find that on a sticker on the remote) but i unable to capture the signal.

I've activated al the modes on the rfxcom but no luck, is there a way to maybe raw capture etc ?

Its an Tumoco electric motor.
doludizgin
Starting Member
Starting Member
 
Posts: 2
Joined: July 2018

Re: RFXCOM find remote signal Tumoco

Postby b_weijenberg » Mon Jul 02, 2018 10:39 pm

This device is not in the list of supported devices.
Please see chapter 2 in the RFXtrx User Guide for the list of supported devices.

For support on RFXCOM contact support rfxcom.com
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
 
Posts: 1727
Joined: May 2006
Location: Netherlands

Re: RFXCOM find remote signal Tumoco

Postby doludizgin » Tue Jul 03, 2018 11:17 am

ah i see.

I knew that the device wasn't supported from the list. Is this software or hardware lacking the support ?

If its software maybe i can contact Tumoco (dutch company) and that i can get some more info about the protocol it uses for transmitting of signals. It can also learn new remotes so maybe we can do something with that feature.

If its hardware then its the end of this story :), thanks anyway!
doludizgin
Starting Member
Starting Member
 
Posts: 2
Joined: July 2018

Re: RFXCOM find remote signal Tumoco

Postby b_weijenberg » Thu Jul 05, 2018 1:03 pm

For support on RFXCOM please contact support rfxcom.com
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
 
Posts: 1727
Joined: May 2006
Location: Netherlands


Return to Rfxcom Receivers & Transmitters Forum

Who is online

Users browsing this forum: No registered users and 1 guest