Hi, every time there has been a power-break the ip-adddress of the RFXcom Lan is changed resulting in HS3 not finding the RFXcom ip=address any-more.
Having had this several times the past few years, I thought now it is finely time to fix this (if possible). Can this be done though the RFXLAN configuration page?
Only thing is I can not log in there... what are the standard login settings (can they be reset? without having to configure everything again!).
Would be a major improvement for the system having a fixed ip-address.
the RFXCOM LAN settings:
VERSIONS:
Web pages: RFXLAN_0_02.web
Firmware: RFXLAN_0_06.hex
Stack Version: v5.31
Build Date: May 21 2011 12:08:53
Wiechert.
fixed ip address
Moderator: b_weijenberg
Re: fixed ip address
Just set the dhcp address to be static for that device on your modem (If your modem supports this)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: fixed ip address
Ok thanks, I will have a look at that. I know the D-link router will support that but have not don that before on my DIR-868L. So let's find out how to do that
Wiechert.
Wiechert.
Re: fixed ip address
Ok this seems to work. I'm not sure if this is what you meant? But added the RFXCOM Lan to he DHCP Reservation List
Add DHCP Reservation
Enable : x
Computer Name :
IP Address :
MAC Address :
So next I will try what happens when I have a power break.
I am reconnecting the electric wiring of an espresso machine I try to repair... which will cause that for sure
Add DHCP Reservation
Enable : x
Computer Name :
IP Address :
MAC Address :
So next I will try what happens when I have a power break.
I am reconnecting the electric wiring of an espresso machine I try to repair... which will cause that for sure
Re: fixed ip address
Yup thats it
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Re: fixed ip address
Ok I performed a "cold restart" simulating a power-break and it worked nicely. Thanks for the help.
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: fixed ip address
And use RFXLAN:10001 for the receiver and RFXLAN:10002 for the RFXmitter in the HS3 plug-in instead of an IP address.
See also chapter 5.4 and 5.5 in the RFXCOM HS3 User Guide
See also chapter 5.4 and 5.5 in the RFXCOM HS3 User Guide