Migrate RFXcom device database from HS2 to HS3
Moderator: b_weijenberg
Migrate RFXcom device database from HS2 to HS3
I`m in the process of migrating my home from HomeSeer2 to HomeSeer3 but is there a way to migrate all RFXcom devices from HS2 to HS3 (in an easy way) so i can keep the device id`s which are used to send to my KaKu plugs (so i don`t have to relearn all modules)
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
See the attached pdf
- Attachments
-
- Export RFXCOM HS2 to HS3.pdf
- (56.16 KiB) Downloaded 657 times
Re: Migrate RFXcom device database from HS2 to HS3
It seems to be working, but my interface is not yet working in HS3 it keeps hanging on
26 (DeviceCmd) transceiver #1 State:Initializing Command not transmitted!
But after update to 30.0.0.28 the interface now seems to be working
26 (DeviceCmd) transceiver #1 State:Initializing Command not transmitted!
But after update to 30.0.0.28 the interface now seems to be working
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
Where stands the database of HS3? It's for making a backup.
Wim
Wim
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
C:\Program Files (x86)\HomeSeer HS3\Data
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
En de file heet dan waarschijnlijk 'HomeseerData_7_3.hsd'.
Maar er staan 3 files met een ander getal op het laatst van dezelfde datum. Wordt de database dan opgebouwd in 3 files?
Wim
Maar er staan 3 files met een ander getal op het laatst van dezelfde datum. Wordt de database dan opgebouwd in 3 files?
Wim
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
I bring all the device in by hand in HS3. By RFXcom devices I can make a lot of choices.
Now I looking for the MS13E. In HS2 it was a a MS13A (Hawkeye II) type.
How must I bring this device in HS3? And which sort of device is it?
B.R. Wim
Now I looking for the MS13E. In HS2 it was a a MS13A (Hawkeye II) type.
How must I bring this device in HS3? And which sort of device is it?
B.R. Wim
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
There is an import utility for RFXCOM devices from HS2 to HS3.
An MS13 is a X10 device and must be added by hand on the Homeseer main page.
Select STATUS ONLY for the house code used by the MS13 on the RFXCOM General config page.
An MS13 is a X10 device and must be added by hand on the Homeseer main page.
Select STATUS ONLY for the house code used by the MS13 on the RFXCOM General config page.
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
Thanks Bert. I will try your information later this week for the MS13A device.
I have tried the import utility, but I like to bring in the devices by hand. So I can use the code I like.
B.R. Wim
I have tried the import utility, but I like to bring in the devices by hand. So I can use the code I like.
B.R. Wim
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
In the main page of HS3: I was going to the plug-ins. In this pulldown menu I made the choice of RFXcom and in the second pulldown menu Output devices.
Here I made a X10-module for the MS13A. See attachment. I hope this will work.
Here I made a X10-module for the MS13A. See attachment. I hope this will work.
-
- Advanced Member
- Posts: 718
- Joined: Wed Aug 12, 2009 1:42 pm
- Location: Eindhoven, Netherlands
Re: Migrate RFXcom device database from HS2 to HS3
Which RFXCOM output device type must I choose for a Sun-650 in HS3?
Wim
Wim