RFXtrx433E 1003 ext2 ac protocol aint working

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

Post Reply
Siewert308SW
Starting Member
Starting Member
Posts: 5
Joined: Mon Jan 12, 2015 3:59 pm

RFXtrx433E 1003 ext2 ac protocol aint working

Post by Siewert308SW »

Is is true or can it be that the AC protocol aint working anymore on 1003 ext2 firmware?
Flashed it two times to day and all my kaku ac modules aren't reacting when i give then commands via Domoticz.
If i flash 1003 ext then those modules are working.
Can't find or i must have missed it any reference about this issue.
Hardware:
RasPi B2 - RFXtrx433E
1x Youless ls110
2x Opus XT300 - Temp/Hum
4x Cresta TX320 - Temp/Hum
25x KaKu switches
1x KaKu Dusk Sensor
10x KaKu Contacts
4x KaKu AWST-6000 PIR
1x Selectplus Chime
4x KD101 smoke detectors
DIY Garden Irrigation
User avatar
b_weijenberg
Forum Moderator
Forum Moderator
Posts: 1744
Joined: Sun May 14, 2006 4:32 pm
Location: Netherlands

Re: RFXtrx433E 1003 ext2 ac protocol aint working

Post by b_weijenberg »

this should be solved in version 1004 which is on the download page now.
Siewert308SW
Starting Member
Starting Member
Posts: 5
Joined: Mon Jan 12, 2015 3:59 pm

Re: RFXtrx433E 1003 ext2 ac protocol aint working

Post by Siewert308SW »

b_weijenberg wrote:this should be solved in version 1004 which is on the download page now.
thx for the quick fix...
Hardware:
RasPi B2 - RFXtrx433E
1x Youless ls110
2x Opus XT300 - Temp/Hum
4x Cresta TX320 - Temp/Hum
25x KaKu switches
1x KaKu Dusk Sensor
10x KaKu Contacts
4x KaKu AWST-6000 PIR
1x Selectplus Chime
4x KD101 smoke detectors
DIY Garden Irrigation
Post Reply

Return to “Rfxcom Receivers & Transmitters Forum”