[ser2net] RFXtrx433e is not working after reboot of HS3

Forum about Rfxcom home automation Domotica devices.

Moderator: b_weijenberg

[ser2net] RFXtrx433e is not working after reboot of HS3

Postby raymonvdm » Sat Dec 23, 2017 2:18 pm

Yesterday i rebooted the Winodws 10 PC running HS3 Pro (3.0.0.357 + RFXcom 30.0.0.35) but since the reboot my ser2net RFXcom is no longer working

Code: Select all

22-12-2017 13:27:34 ~!~Info~!~Plugin RFXCOM has connected. IP:127.0.0.1:49975
22-12-2017 13:27:34 ~!~RFXCOM~!~35 (InitIO) RFXCOM version is:30.0.0.35
22-12-2017 13:27:35 ~!~RFXCOM~!~35 (InitTRX) Connect Transceiver #1  on COM9
22-12-2017 13:27:35 ~!~RFXCOM Error: ~!~35 (StartIO) transceiver 2 has no com interface configured!



I already upgraded to 30.0.0.36
I have restarted ser2net
Enable/Disabled the plugin

Note: The other RFXtrx433 which is connected by USB is working fine
Note2: I`m also running Domoticz and the ser2net setup is working fine (when HS3 is not running) So the ser2net machine or interface is not the issue

Code: Select all

2017-12-23 14:21:01.307 RFXCOM: TCP/IP Worker stopped...
2017-12-23 14:21:04.380 RFXCOM: connected to: 192.168.110.244:10001
2017-12-23 14:21:04.976 subtype = Interface Response
Sequence nbr = 2
response on cmnd = Get Status
Transceiver type = 433.92MHz
Firmware version = 1001
Firmware type = Ext
Hardware version = 1.3
Undec off
X10 enabled
ARC enabled
AC enabled
HomeEasy EU disabled
Meiantech/Atlantic disabled
Oregon Scientific enabled
ATI/Cartelectronic disabled
Visonic disabled
Mertik disabled
AD disabled
Hideki enabled
La Crosse disabled
FS20/Legrand disabled
ProGuard disabled
BlindsT0 disabled
BlindsT1 disabled
AE disabled
RUBiCSON disabled
FineOffset disabled
Lighting4 disabled
Conrad RSL disabled
ByronSX enabled
IMAGINTRONIX disabled
KEELOQ disabled
Home Confort disabled

2017-12-23 14:23:00.047 (RFXtrx433e KMP1) Lighting 2 (Unknown)
2017-12-23 14:23:07.173 (RFXtrx433e KMP1) Lighting 2 (Unknown)

Last edited by raymonvdm on Sat Dec 23, 2017 2:33 pm, edited 1 time in total.
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
 
Posts: 1153
Joined: December 2011

Re: [ser2net] RFXtrx433e is not working after reboot of HS3

Postby raymonvdm » Sat Dec 23, 2017 2:32 pm

And now it is working....

Apparently the COM port = TCP/IP was not save correctly

Image
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
 
Posts: 1153
Joined: December 2011


Return to Rfxcom Receivers & Transmitters Forum

Who is online

Users browsing this forum: No registered users and 1 guest