i dont get a signal in rfxcom receiver from the oregon scale,i changed the batteries but that didn`t help.
anny ideas?
greetings edwin
Oregon Scientific BWR102 Weight Scale
Moderator: b_weijenberg
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Oregon Scientific BWR102 Weight Scale
Is the scale received by the Oregon display unit?
Do you have a receiver version >= 1B ?
With RFreceiver select Variable Length mode than Enable All RF and disable all protocols you do not need (except Oregon/OS)
Do you have a receiver version >= 1B ?
With RFreceiver select Variable Length mode than Enable All RF and disable all protocols you do not need (except Oregon/OS)
Re: Oregon Scientific BWR102 Weight Scale
Bert,The scale is recieved by the display,and the reciever is a half year old i think
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Oregon Scientific BWR102 Weight Scale
what about the 3rd line?
Re: Oregon Scientific BWR102 Weight Scale
in the receiver comes a signal :b_weijenberg wrote:what about the 3rd line?
38BCC6F88499B016 WEIGHT1[12] BWR101,BWR102 addr:C Weight: 92,8 kg | 219,6 lb | 16: -4,4 st-lb Unknown byte=4F bits=56
but not in homeseer?
greetings edwin
- b_weijenberg
- Forum Moderator
- Posts: 1744
- Joined: Sun May 14, 2006 4:32 pm
- Location: Netherlands
Re: Oregon Scientific BWR102 Weight Scale
Have you enabled Oregon in the receiver config in the RFXCOM plugin?
Step on the scale then goto to Add Input Device. The WEIGHT1[12] should be available to add.
Hint: do some paper or foam between the batteries and the lit. Otherwise the scale will sometimes get another address due to a reset when you step on the scale and the batteries don't make contact for a short moment.
Step on the scale then goto to Add Input Device. The WEIGHT1[12] should be available to add.
Hint: do some paper or foam between the batteries and the lit. Otherwise the scale will sometimes get another address due to a reset when you step on the scale and the batteries don't make contact for a short moment.
Re: Oregon Scientific BWR102 Weight Scale
I will try that,thanks Bert
Re: Oregon Scientific BWR102 Weight Scale
Bert ,the script now runs when i step on the scale,and also updates the device string,but for some reason the weight by the virtual device "gewicht edwin" doesnt
I didn`t change annything in the ini file and it worked before,how is this possible?
thanks,
greetings edwin
I didn`t change annything in the ini file and it worked before,how is this possible?
thanks,
greetings edwin
-
- Starting Member
- Posts: 1
- Joined: Sat Mar 09, 2013 2:35 pm
Re: Oregon Scientific BWR102 Weight Scale
Edwin,
Make sure to enable Oregon. This function works with RFXCOM Plugin with receiver config. Follow the procedure and from the scale, add input device. Asa result, the screen weight 1 will be ready to add. Use some thing between the batteries and the lit to escape irrelevant scale indications.
Make sure to enable Oregon. This function works with RFXCOM Plugin with receiver config. Follow the procedure and from the scale, add input device. Asa result, the screen weight 1 will be ready to add. Use some thing between the batteries and the lit to escape irrelevant scale indications.