Oregon Scientific BWR102 Weight Scale

[Edwin]

i dont get a signal in rfxcom receiver from the oregon scale,i changed the batteries but that didn`t help.
anny ideas?

greetings edwin

[b_weijenberg]

Is the scale received by the Oregon display unit?

Do you have a receiver version >= 1B ?

With RFreceiver select Variable Length mode than Enable All RF and disable all protocols you do not need (except Oregon/OS)

[Edwin]

Bert,The scale is recieved by the display,and the reciever is a half year old i think

[b_weijenberg]

what about the 3rd line?

[Edwin]

what about the 3rd line?

in the receiver comes a signal :
38BCC6F88499B016 WEIGHT1[12] BWR101,BWR102 addr:C Weight: 92,8 kg | 219,6 lb | 16: -4,4 st-lb Unknown byte=4F bits=56

but not in homeseer?

greetings edwin

[b_weijenberg]

Have you enabled Oregon in the receiver config in the RFXCOM plugin?

Step on the scale then goto to Add Input Device. The WEIGHT1[12] should be available to add.

Hint: do some paper or foam between the batteries and the lit. Otherwise the scale will sometimes get another address due to a reset when you step on the scale and the batteries don't make contact for a short moment.

[Edwin]

I will try that,thanks Bert

[Edwin]

Bert ,the script now runs when i step on the scale,and also updates the device string,but for some reason the weight by the virtual device "gewicht edwin" doesnt
I didn`t change annything in the ini file and it worked before,how is this possible?

thanks,
greetings edwin

[Maathai Wangari]

Edwin,

Make sure to enable Oregon. This function works with RFXCOM Plugin with receiver config. Follow the procedure and from the scale, add input device. Asa result, the screen weight 1 will be ready to add. Use some thing between the batteries and the lit to escape irrelevant scale indications.