Quick start Domoticz Raspberry Pi

[b_weijenberg]

With the RFXtrx433 + 4GB SD card it is now easy to start Domoticz in 7 steps on a Raspberry Pi Type-B:
1 Make a back-up of the RFXCOM Domoticz SD card
2 Insert the RFXCOM SD card in the Raspberry PI.
3 Connect the RFXtrx USB cable.
4 Connect the LAN cable.
5 Connect the power, wait about 30 seconds.
6 Start a browser and go to http://raspberrypi:8080
7 Select Setup – Hardware and configure the RFXtrx433

http://www.rfxcom.com/Documents/Quick_S ... D_card.pdf
http://www.rfxcom.com/store/Transceivers/13103

[FoRMaTC]

Nu nog zwave