RFXCom adding a new Temp/hygro sensor (Bresser)

Forum about News and things to know about the Bwired Forum will be placed here.

RFXCom adding a new Temp/hygro sensor (Bresser)

Postby Roman.E » Wed Feb 01, 2017 11:39 am

Hello guys,

I recently bought a used RFXcom (with temperature sensors), it had wireless RFXCom temp sensors connected to it. The wireless temp sensors work on a (X10 protocol). Within the rfxmanager I could set the RFXCom protocol to X10 and it was able to read the data from the older RFXsensors. I was looking for an upgrade for my setup. So I went looking for newer temp/hygro sensors. I came across the Bresser Hygro/thermo wireless sensors. Now I would like to connect this sensor to my RFXcom, however that did no go as easy as I hoped to. The rfxmanager does not show any data from the new sensor. I also can't find on which protocol the new sensors works.

So my question is, how do I setup my RFXCom for a new sensor? :)

Kind regards

Roman.E
The Netherlands
Attachments
60239827.jpg
New Thermo/Hygro Sensor (protocol unknown) frequency 433 Mhz
60239827.jpg (17.45 KiB) Viewed 1720 times
2000576887.jpeg
Old Temp sensor (protocol X10)
2000576887.jpeg (10.61 KiB) Viewed 1720 times
Roman.E
Starting Member
Starting Member
 
Posts: 1
Joined: February 2017

Return to News Forum

Who is online

Users browsing this forum: No registered users and 1 guest