RFXCom adding a new Temp/hygro sensor (Bresser)

Forum about News and things to know about the Bwired Forum will be placed here.

Moderator: TheHogNL

Post Reply
Roman.E
Starting Member
Starting Member
Posts: 1
Joined: Wed Feb 01, 2017 11:41 am

RFXCom adding a new Temp/hygro sensor (Bresser)

Post by Roman.E »

Hello guys,

I recently bought a used RFXcom (with temperature sensors), it had wireless RFXCom temp sensors connected to it. The wireless temp sensors work on a (X10 protocol). Within the rfxmanager I could set the RFXCom protocol to X10 and it was able to read the data from the older RFXsensors. I was looking for an upgrade for my setup. So I went looking for newer temp/hygro sensors. I came across the Bresser Hygro/thermo wireless sensors. Now I would like to connect this sensor to my RFXcom, however that did no go as easy as I hoped to. The rfxmanager does not show any data from the new sensor. I also can't find on which protocol the new sensors works.

So my question is, how do I setup my RFXCom for a new sensor? :)

Kind regards

Roman.E
The Netherlands
Attachments
New Thermo/Hygro Sensor (protocol unknown) frequency 433 Mhz
New Thermo/Hygro Sensor (protocol unknown) frequency 433 Mhz
60239827.jpg (17.45 KiB) Viewed 6913 times
Old Temp sensor (protocol X10)
Old Temp sensor (protocol X10)
2000576887.jpeg (10.61 KiB) Viewed 6913 times
Post Reply

Return to “News Forum”