Thin wallswitch

Forum about LEDS, LED lights, DMX and other lights.

Moderator: Mversluis

Post Reply
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

Thin wallswitch

Post by DJF3 »

Hi,

Because of cabling and a fibaro module there's not enough space for a normal wall switch..

Do you know if there are thin (ondiepe) wall switches?

DJ
AshaiRey
Senior Member
Senior Member
Posts: 1310
Joined: Mon Feb 02, 2009 5:27 pm
Location: Netherlands
Contact:

Re: Thin wallswitch

Post by AshaiRey »

KaKu switches can be flat on the wall. But you probaly don't want to use KaKu so don't . Get everything out of the KaKu switch except the switches. Just wire the fibaro switch to the internal switches in the KaKu
Bram
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Thin wallswitch

Post by raymonvdm »

Or place the fibaro module inside the lamp or pattress box in the ceiling
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

Re: Thin wallswitch

Post by DJF3 »

raymonvdm wrote:Or place the fibaro module inside the lamp or pattress box in the ceiling
There's no space either :)

So here's what I have, and (marked in green) what I would love to have..
wall switch
wall switch
IMG_4503.jpg (148.89 KiB) Viewed 9154 times
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Thin wallswitch

Post by raymonvdm »

There are two types of patress boxes (55mm and 40mm) i think you have the 40mm

One solution is to use a duwi lookalike switch or use some sort of filler to create the needed space
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Akatar
Senior Member
Senior Member
Posts: 1134
Joined: Thu Nov 22, 2007 12:25 am
Location: the netherlands

Re: Thin wallswitch

Post by Akatar »

zelf zou ik dan voor een pulsschakelaar gaan omdat er een fibaro achterzit
misschien zijn deze ook wat ondieper?
http://www.elektrooke.nl/peha-pulsschak ... GwodPaIOyw

of een duwi wandzender, die kunnen plat op de muur
Post Reply

Return to “LEDS, DMX & Lights Forum”