Page 1 of 1
Thin wallswitch
Posted: Wed Nov 11, 2015 9:20 pm
by DJF3
Hi,
Because of cabling and a fibaro module there's not enough space for a normal wall switch..
Do you know if there are thin (ondiepe) wall switches?
DJ
Re: Thin wallswitch
Posted: Thu Nov 12, 2015 5:54 pm
by AshaiRey
KaKu switches can be flat on the wall. But you probaly don't want to use KaKu so don't . Get everything out of the KaKu switch except the switches. Just wire the fibaro switch to the internal switches in the KaKu
Re: Thin wallswitch
Posted: Thu Nov 12, 2015 6:14 pm
by raymonvdm
Or place the fibaro module inside the lamp or pattress box in the ceiling
Re: Thin wallswitch
Posted: Sat Nov 14, 2015 12:32 pm
by DJF3
raymonvdm wrote:Or place the fibaro module inside the lamp or pattress box in the ceiling
There's no space either
So here's what I have, and (marked in green) what I would love to have..
- wall switch
- IMG_4503.jpg (148.89 KiB) Viewed 9312 times
Re: Thin wallswitch
Posted: Sat Nov 14, 2015 5:13 pm
by raymonvdm
There are two types of patress boxes (55mm and 40mm) i think you have the 40mm
One solution is to use a duwi lookalike switch or use some sort of filler to create the needed space
Re: Thin wallswitch
Posted: Sat Nov 14, 2015 5:45 pm
by Akatar
zelf zou ik dan voor een pulsschakelaar gaan omdat er een fibaro achterzit
misschien zijn deze ook wat ondieper?
http://www.elektrooke.nl/peha-pulsschak ... GwodPaIOyw
of een duwi wandzender, die kunnen plat op de muur