protecting Choice

Forum about hardware/software for the Philips Pronto TSU9600 and other remotes.

Moderator: hvxl

Post Reply
ictdokter
Starting Member
Starting Member
Posts: 4
Joined: Thu May 08, 2008 12:55 pm
Location: Netherlands

protecting Choice

Post by ictdokter »

I just bought an TSU9600. Wonderfull machine.
Is there anyone who can tell me how to protect a button with a PIN code.

Thx
User avatar
Snelvuur
Forum Moderator
Forum Moderator
Posts: 3156
Joined: Fri Apr 06, 2007 11:01 pm
Location: Netherlands
Contact:

protecting Choice

Post by Snelvuur »

You would need to create (i think) a javascript page. A page with all the digits. You then should record those button presses, and a function to press enter. After the enter is pressed based on the recorded value's it could show a different page.

Only dont know really where to start for this, what you can try is also post your request at www.remotecentral.com at the pronto 9600 section. (since there are some big wizzards with javascript there) only dont forget, dont ask simple questions or they give you the rtfm post back... so read up :)

// Erik (binkey.nl)
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

protecting Choice

Post by Digit »

My idea too, a page with all the buttons from 0-9, record the buttons pressed and compare with the PIN. If correct, jump to the protected Activity.
Post Reply

Return to “Philips Pronto (TSU9600), IRtrans and other remotes”