IRTrans - how to configure automatic passthrough of signals?

Forum about hardware/software for the Philips Pronto TSU9600 and other remotes.

Moderator: hvxl

Post Reply
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

IRTrans - how to configure automatic passthrough of signals?

Post by DJF3 »

Hi,

Right now I have a marmitek device that captures my IR signals and extends them to the devices (cable decoder, media player) that are inside a closet. (wired extension!)

Can I use the IRTrans receiver LED to capture the signals and automatically send them to the decoders & media players?
Important: this should work without HomeSeer.

HomeSeer will ofcourse also receive the signals but won't do anything for most of these signals.

thanks
DJ
User avatar
TANE
Forum Moderator
Forum Moderator
Posts: 4806
Joined: Fri Apr 06, 2007 9:46 pm
Location: Netherlands
Contact:

IRTrans - how to configure automatic passthrough of signals?

Post by TANE »

DJ in the config menu you can select the self repeat option.
Signals will be send to the internal and external outputs.


<hr noshade size="1"><font size="1">Enver
http://twitter.com/Chak64%20My%20Domoti ... dware.html<i> My Domotica Hardware Software</i></font id="size1">
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

IRTrans - how to configure automatic passthrough of signals?

Post by DJF3 »

CHECK! Going to test this right away

DJ
DJF3
Advanced Member
Advanced Member
Posts: 895
Joined: Thu Jul 12, 2007 9:28 am
Contact:

IRTrans - how to configure automatic passthrough of signals?

Post by DJF3 »

This works. The only problem is that it adds a 0.3-0.5 second delay. This means that if you're scrolling through a list (EPG) it's feels like it responds slowly.

Is this an inevitable delay added by the IRtrans electronics?

Thanks
DJ

PS. When should I see IR signals appearing in my HomeSeer logfile? The I/R Match event trigger is not working.. HS <i>can</i> send IR signals.
Post Reply

Return to “Philips Pronto (TSU9600), IRtrans and other remotes”