Read this topic:
http://www.remotecentral.com/cgi-bin/mb ... ad.cgi?951
It describes how you can get all your debugging output displayed on your PC screen. All it takes is some soldering on the PCB in "the base", a cable and a piece of software on your PC.
BTW,
this forum is a must-read for every Pronto owner.
Tip for Pronto debugging
Moderator: hvxl
- Snelvuur
- Forum Moderator
- Posts: 3156
- Joined: Fri Apr 06, 2007 11:01 pm
- Location: Netherlands
- Contact:
Tip for Pronto debugging
I'am snelvuur there too
// Erik (binkey.nl)
// Erik (binkey.nl)
Tip for Pronto debugging
I know; and Chak can be found there to. But who knows what other Pronto-users are reading this forum, so that why i posted it anyway.
- Snelvuur
- Forum Moderator
- Posts: 3156
- Joined: Fri Apr 06, 2007 11:01 pm
- Location: Netherlands
- Contact:
Tip for Pronto debugging
If i know there dutch, i send them a message to come check out this place too other can too ofcourse.. but sometimes its handy.
// Erik (binkey.nl)
// Erik (binkey.nl)