2-way communication, 2-wire module

Forum about PLCBUS devices & software.

Moderator: Digit

2-way communication, 2-wire module

Postby Digit » Sun Sep 21, 2008 11:18 pm

For those who didn't know this yet and really don't like extra wires:

Image

http://x10-hk.com/store/product_info.php?products_id=32

Features :
- Two Way Communication
- Light status feedback speed in 0.1 second
- 64 Brightness level for Incandescent lamp (Dimmer only)
- Soft start 0-9 seconds setup for Incandescent lamp (Dimmer only)
- Highly Reliable, error rate in 1/10000
- Super High anti-jamming capability
- Code Set Electronically.
- Different Scenes up to 16 for Micro Modules only
- Power : 300W Max
- Load Type : Incandescent
User avatar
Digit
Global Moderator
Global Moderator
 
Posts: 3388
Joined: March 2006
Location: Netherlands

2-way communication, 2-wire module

Postby Bwired » Sun Sep 21, 2008 11:30 pm

Nice!
I'm I correct that they implemented a status update? Is the module now sending a status over the powerline when it is switched On or Off.
User avatar
Bwired
Administrator
Administrator
 
Posts: 5300
Joined: March 2006
Location: Netherlands

2-way communication, 2-wire module

Postby Digit » Sun Sep 21, 2008 11:33 pm

Well i can't say anything from my own experience, but knowing how PLCBUS works i would say no; it would surprise me if it did. I can tell you more in a couple of weeks... i don't have this module yet.[:(]
User avatar
Digit
Global Moderator
Global Moderator
 
Posts: 3388
Joined: March 2006
Location: Netherlands

2-way communication, 2-wire module

Postby Willem4ever » Mon Sep 22, 2008 7:59 am

note: you have to place this module near the lamp (ceiling) you are switching, and you need a momentary normally closed switch.
User avatar
Willem4ever
Global Moderator
Global Moderator
 
Posts: 804
Joined: October 2006
Location: Uithoorn / Netherlands


Return to PLCBUS Forum

Who is online

Users browsing this forum: No registered users and 1 guest