2-way communication, 2-wire module

Forum about PLCBUS devices & software.

Moderator: Digit

Post Reply
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

2-way communication, 2-wire module

Post by Digit »

For those who didn't know this yet and really don't like extra wires:

Image

http://x10-hk.com/store/product_info.php?products_id=32

Features :
- Two Way Communication
- Light status feedback speed in 0.1 second
- 64 Brightness level for Incandescent lamp (Dimmer only)
- Soft start 0-9 seconds setup for Incandescent lamp (Dimmer only)
- Highly Reliable, error rate in 1/10000
- Super High anti-jamming capability
- Code Set Electronically.
- Different Scenes up to 16 for Micro Modules only
- Power : 300W Max
- Load Type : Incandescent
Bwired
Administrator
Administrator
Posts: 4704
Joined: Sat Mar 25, 2006 1:07 am
Location: Netherlands
Contact:

2-way communication, 2-wire module

Post by Bwired »

Nice!
I'm I correct that they implemented a status update? Is the module now sending a status over the powerline when it is switched On or Off.
Digit
Global Moderator
Global Moderator
Posts: 3388
Joined: Sat Mar 25, 2006 10:23 am
Location: Netherlands
Contact:

2-way communication, 2-wire module

Post by Digit »

Well i can't say anything from my own experience, but knowing how PLCBUS works i would say no; it would surprise me if it did. I can tell you more in a couple of weeks... i don't have this module yet.[:(]
User avatar
Willem4ever
Global Moderator
Global Moderator
Posts: 805
Joined: Mon Oct 30, 2006 3:48 pm
Location: Uithoorn / Netherlands

2-way communication, 2-wire module

Post by Willem4ever »

note: you have to place this module near the lamp (ceiling) you are switching, and you need a momentary normally closed switch.
Post Reply

Return to “PLCBUS Forum”