Need help with setup
Posted: Tue Oct 13, 2009 11:08 am
Hi!
I have bought some PLCBUS-2263D and a PLCBUS-1141.
PLCBUS-2263D is connected and works localy (black and yellow wires), I have connected Neutral, Live and Lamp.
PLCBUS-1141 is connected to a computer, driver installd and PLCBUS Universal Controller Program.
I have set the com-port to 4 and open the com port = working.
What is the next step, how do I get the 2263D to respond to the Universal Controller Program? (I have tried holding the button on the 2263 down and the blue light starts to blink after release and then sending ON command but cant get it to work.)
Wrong settings?
/plastic
I have bought some PLCBUS-2263D and a PLCBUS-1141.
PLCBUS-2263D is connected and works localy (black and yellow wires), I have connected Neutral, Live and Lamp.
PLCBUS-1141 is connected to a computer, driver installd and PLCBUS Universal Controller Program.
I have set the com-port to 4 and open the com port = working.
What is the next step, how do I get the 2263D to respond to the Universal Controller Program? (I have tried holding the button on the 2263 down and the blue light starts to blink after release and then sending ON command but cant get it to work.)
Wrong settings?
/plastic