Hi,
I'm using DomotiGa and RFXmeter.
For several weeks I'm trying to read the Power and Gas consumption.
I have no idea how to calibrate DomotiGa for a proper indication.
My meter gives 1000 Leds for a kWh...... So... 1 ledblink for a Wh.
What I got are two different values:
What I want is in Value 1 the actual number according the "orignal Nuonmeter" and in Value 2 the powerconsumption in a Hour.
That is the powerproblem. Still I have the GAsconsumption as well..!! How to fix this.. Same way?
Thanks
B
Calibration RFXmeter Power/gas
Moderator: RDNZL
Calibration RFXmeter Power/gas
- Attachments
-
- Selection_001.png (83.77 KiB) Viewed 4394 times
Last edited by Bennieo on Sat Jan 19, 2013 11:27 pm, edited 1 time in total.
Re: Calibration RFXmeter Power/gas
As far as I know, that is not posible (yet) with domotiga.
Kind Regards,
Greg.
Greg.
Re: Calibration RFXmeter Power/gas
Within calibration tab you should be able to "fix" the Value1 for sure. Something like:
(Value / 1000) + <offset>
Then it will give your Nuon values.
(Value / 1000) + <offset>
Then it will give your Nuon values.
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Re: Calibration RFXmeter Power/gas
Not per hour, that's correct. The collected information is in the DB, but isn't easy accessible ... but i hope that changes in the near future (more and more people want a kind of report about usage)
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Re: Calibration RFXmeter Power/gas
Thx... After couple of calculatings and testing I have a proper indication....Within calibration tab you should be able to "fix" the Value1 for sure. Something like:
(Value / 1000) + <offset>
Now waiting for an Hour usage..!!