Hello,
Domotiga on Rpi.. Followed http://domotiga.nl/projects/domotiga/wiki/Z-Wave .
Installed with no errors but can not enable open z wave.
Any idea what could be wrong ?
U
No open-zwave option under ZWave settings
Moderator: RDNZL
-
- Starting Member
- Posts: 6
- Joined: Sun Mar 31, 2013 8:44 am
Re: No open-zwave option under ZWave settings
What's the problem exactly?
There's a check box on the top right corner, which needs to be checked to enable Z-Wave support. Is that not working? Cause it's turned off at the moment.
There's a check box on the top right corner, which needs to be checked to enable Z-Wave support. Is that not working? Cause it's turned off at the moment.
-
- Member
- Posts: 255
- Joined: Thu Jun 25, 2009 2:09 pm
- Location: Enschede, The Netherlands
Re: No open-zwave option under ZWave settings
Did you install the wrapper? Then you should be able to enable it in the settings. The only supported version now is the open z-wave version, so no need to explicitly enable open z-wave.
Re: No open-zwave option under ZWave settings
You DO need to enable it, or nothing will happen, wrapper or not.
What's in your logfile? If the wrapper is outdated, it won't stay enabled and give you an error in the log.
What's in your logfile? If the wrapper is outdated, it won't stay enabled and give you an error in the log.