Automatic reboot when inserting Aeon Labs Z stick

Forum about Domotiga Open Source Home Automation for Linux.

Moderator: RDNZL

Post Reply
tonynelson
Starting Member
Starting Member
Posts: 4
Joined: Fri Mar 14, 2014 2:28 am

Automatic reboot when inserting Aeon Labs Z stick

Post by tonynelson »

Hi,

Any time that I insert the Aeon Labs Z Stick v2 into the Raspberry Pi it causes the Pi to reboot.

Have others experienced this? Is it standard behaviour? It's not something I'd normally do a lot of but it happens a lot while I'm trying to add new nodes to the system.

Thanks for any feedback.

Tony.
wwolkers
Member
Member
Posts: 273
Joined: Tue Sep 23, 2008 10:10 am
Location: Netherlands
Contact:

Re: Automatic reboot when inserting Aeon Labs Z stick

Post by wwolkers »

Must be power related.

The Aeon stick should not be used directly in the PI, but via a powered hub.
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Automatic reboot when inserting Aeon Labs Z stick

Post by raymonvdm »

I also had this issue when plugin in directly to the PI so i used a Dlink powered hub which has a 5V 3A power supply so it should give you enough power for the PI and the Aeon Labs

http://www.bol.com/nl/p/d-link-7-port-h ... 005771908/
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Post Reply

Return to “DomotiGa Forum”