There is a new Beta version of the Source available for registered beta users.
Plugwise Source 2.14 Beta 20100224
This is a maintenance release that fixes several issues.
For registered beta users using release firmware version 1: After you install this update, click the update button again to update to beta firmware version 2.
Fixed:
-#761 Not all retrieved data is processed; graphs show gaps
Known issues:
- Manuals need updating
Plugwise Source 2.14 Beta 20100217
This is a maintenance release that fixes several issues.
For registered beta users using release firmware version 1: After you install this update, click the update button again to update to beta firmware version 2.
Fixed:
-#752 Fast schedule verification does not work when schedule contains standby values
-#748 Cannot remove Switch that does not come online
-#709 Week, month en year graphs do not distinguish between usage and production
-#705 Wrong week numbers in Dutch
-#703 USB icon stays in Busy state after sending broadcast groups.
-#695 Peak/offpeak graph not correct in weekends
-#691 After deleting a room, appliances do not show up in list
-#690 ConfWiz: After every run an new tariff is added.
-#622 Switch button list not visible yet just after adding first Switch
-#596 OTA: no updates when network only consists of Stick and Circle+
-#499 OTA: Update of unassigned Stick failes
-#465 Save button not fully visible in Tariff screen
-#444 OTA: Cannot select network in case of multiple networks
- Serveral crashes
Changes:
- Appliances: Power production has a seperate column
- Tariff: Days of week to use peak tariff for are selectable
- Pro: Network names can be changed
- Pro: List of networks added
- Setup: Any installed PDF reader will be detected, not just Acrobat Reader
- OTA: Suppport for Switch
- OTA: Will now work via Stretch Lite Pro
- OTA: No longer in beta
- OTA: Update multiple networks simultaneously
Known issues:
- Manuals need updating
New beta Source 2.14 available (RC)
New beta Source 2.14 available (RC)
Last edited by Reinder on Thu Feb 25, 2010 12:24 am, edited 1 time in total.
Re: New beta Source 2.14 available (RC)
I did update to this version a couple of days ago, but it seems that it is missing the majority of the data:
It appears to me that everything is fine when the source is running, but in this case the source was not running for a couple of days, and that seems to cause the missing data.
I'm absolutely confident that my equipment was not switched of, the graph shows my server equipment (no UPS ):
# who -r
run-level 3 Jan 26 22:20 3 0 S
I also notice the very same behavior on my switches, cable modem etc.
I'm 100% sure that this started as of this new version (2.14).
Anyone else?
It appears to me that everything is fine when the source is running, but in this case the source was not running for a couple of days, and that seems to cause the missing data.
I'm absolutely confident that my equipment was not switched of, the graph shows my server equipment (no UPS ):
# who -r
run-level 3 Jan 26 22:20 3 0 S
I also notice the very same behavior on my switches, cable modem etc.
I'm 100% sure that this started as of this new version (2.14).
Anyone else?
Re: New beta Source 2.14 available (RC)
I think Plugwise has noticed this bug .
Today a bugfix on version 2.14 is released (as a beta update).
Today a bugfix on version 2.14 is released (as a beta update).
Re: New beta Source 2.14 available (RC)
Thanks for fixing the "missing data" issue. Plugwise has now retrieved all the missing intervals after updating to beta 2.14 (20100224.0)
But:
-#695 Peak/offpeak graph not correct in weekends
is NOT fixed, as I'm looking at the charts right now it shows peak usage for both today and yesterday starting at 07:00 (and ending at 23:00 for yesterday). The "funny" things is that it's:
- wrong in the hourly overview for both Saturday and Sunday
- It shows offpeak usage in the daily overview for Saturday (but incorrect for Sunday)
- - It shows offpeak usage in the weekly overview for week 9 (but incorrect for week 10)
Which brings me to another point:
-#705 Wrong week numbers in Dutch
Last week was week 8, today week 9 has started, but PW shows week 9 and 10 respectively.
Week 1 was the week starting Sunday 3 Jan. (Week 1: the week with the year's first Thursday in it (the ISO 8601 definition)
But:
-#695 Peak/offpeak graph not correct in weekends
is NOT fixed, as I'm looking at the charts right now it shows peak usage for both today and yesterday starting at 07:00 (and ending at 23:00 for yesterday). The "funny" things is that it's:
- wrong in the hourly overview for both Saturday and Sunday
- It shows offpeak usage in the daily overview for Saturday (but incorrect for Sunday)
- - It shows offpeak usage in the weekly overview for week 9 (but incorrect for week 10)
Which brings me to another point:
-#705 Wrong week numbers in Dutch
Last week was week 8, today week 9 has started, but PW shows week 9 and 10 respectively.
Week 1 was the week starting Sunday 3 Jan. (Week 1: the week with the year's first Thursday in it (the ISO 8601 definition)