Script to send data to comport for DMX4ALL controller

Forum over Homeseer scripts (DUTCH forum)

Moderators: TANE, Ruud

raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Script to send data to comport for DMX4ALL controller

Post by raymonvdm »

I tried to contact him in the past but never got a response

This is the topic about DMX http://board.homeseer.com/showthread.ph ... 655&page=4
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
raymonvdm
Senior Member
Senior Member
Posts: 1153
Joined: Sun Dec 18, 2011 1:23 am

Re: Script to send data to comport for DMX4ALL controller

Post by raymonvdm »

Today i tried to use the DMX interface with Open-Lighting on Ubuntu to get DMX support in OpenHAB and during this attempt i found out the following

I succeeded in change color using Putty on /dev/ttyUSB1 and with a baud rate of 192000 or 384000 baud

When typing the following commands the corrosponding channels changed to level 255

c001l255 = red
c002l255 = green
c003l255 = blue

No in need te test this using the HS2 script option
Running HS3PRO on PC with Z-Wave / OpenTherm / Plugwise / RFXcom / MQTT / XAP400 / Logitech Media Server and Squeezelite on PI`s
Post Reply

Return to “Homeseer Scripts Forum”