zwave.me WallC-S

Forum and Topics about Z-Wave devices.
Post Reply
r.dirksen
Starting Member
Starting Member
Posts: 6
Joined: Fri May 01, 2015 10:35 am

zwave.me WallC-S

Post by r.dirksen »

I bought a zwave.me Wallc-s battery operated wallswitch. It has 4 monostable switchtes. According to the manual, this device, when included, should work as a scene controller.
I included the device successfully in my ZIPAbox.
So I expected something like 4 sensors, which I could couple to scenes in the rule creator.

In stead I get 1 new module and 5 new endpoints: Group 2, 3, 4 and 5 and an "unknown" endpoint.

Only the endpoint with the name "unknown" is found as a sensor in the moduleslist of the rule creator.

if I use "every" action of the unknown sensor in the WHEN statement, like in the picture it works, but of course I want to activate a scene with every button and also with a double click.
rules
rules
28-6-2015 22-00-14.jpg (35.17 KiB) Viewed 3535 times
who can point me in the right direction?
Post Reply

Return to “Z-Wave Forum”