i am (finally) starting to introduce myself within Domoticz. I have added a home energy meter 2E HEM3 as a device. Now i see a lot of V(olt), W(att) and A(mps) usage.....but i now want to compine all these usages into one single kWh notation. I would say no problem.....weel for me it is.
When i go to the configuration of the unit (Configuration--Hardware--click on the usb zwave to see the nodes---click on the Aeotec home energy meter G2) i can generate group reports 101 102 103 and all the info is noted what to fill in...
Code: Select all
101. Group 1 Reports:
0
(huidig: 0)
Which reports need to send in group1. Format is as follows: Byte 1 (msb): Reserved Byte 2: Reserved Byte 3: Bit 7: reserved Bit 6: reserved Bit 5: Auto Send Meter Report (for kWh) at the group time interval (Clamp 3) Bit 4: Auto Send Meter Report (for kWh) at the group time interval (Clamp 2) Bit 3: Auto Send Meter Report (for kWh) at the group time interval (Clamp 1) Bit 2: Auto Send Meter Report (for watts) at the group time interval (Clamp 3) Bit 1: Auto Send Meter Report (for watts) at the group time interval (Clamp 2) Bit 0: Auto Send Meter Report (for watts) at the group time interval (Clamp 1) Byte 4 (lsb): Bit 7: reserved Bit 6: reserved Bit 5: reserved Bit 4: reserved Bit 3: Auto Send Meter Report (for kWh) at the group time interval (whole HEM) Bit 2: Auto Send Meter Report (for watts) at the group time interval (whole HEM) Bit 1: Auto Send Multilevel Sensor Report (for watts) at the group time interval (whole HEM) Bit 0: Auto Send Battery Report at the group time interval (whole HEM)
Last Update: Fri Oct 16 15:10:35 2015
And what i want is
Code: Select all
Bit 3: Auto Send Meter Report (for kWh) at the group time interval (whole HEM)
WTF.....can someone show me how to do this, or where i can find the complete info....
The next thing is that in my devices overview i can see 4 CM113 items...but i only have 3 clamps.....how is it possible that it shows 4 measuring value's.
See picture
thanks