I addes a Duwi Blind control today to my Vera Lite system, but it doesn't work.
With a default (analog) switch my Shutter goes up and down, but with the Duwi it doesn't do anything. When i press the button i hear a click in the Duwi so it makes contact, but the motor of the Shutter doesn't react.
Is there anything i need to configure for this duwi device?
Thanks in advanced.
Duwi Z-Wave Blind Control
Re: Duwi Z-Wave Blind Control
Just asking: you did connect the wires correctly? The Duwi documentation isn't too clear, and if you "blindly" connect it, it will not work (some unlogical picture).
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Re: Duwi Z-Wave Blind Control
Fixed to problem thank to tane.
I was indeed a wire problem, the documentation isn't that clear indeed.
I was indeed a wire problem, the documentation isn't that clear indeed.