Motor control for 12V motorized roller blinds
Motor control for 12V motorized roller blinds
Is there such a thing with Z-wave?
I want to use this: http://rollertrol.com/universal-DC-moto ... nds-shades
... but with Z-wave control. Which z-wave device can I use?
I want to use this: http://rollertrol.com/universal-DC-moto ... nds-shades
... but with Z-wave control. Which z-wave device can I use?
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
Any specific module comes to mind?
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
The Duwi, Duwi.me or fibaro one? I think you can use all.
groeten,
Harry
Harry
Re: Motor control for 12V motorized roller blinds
My brain must be off! The engine is running, but there's noone behind the wheel...
Yes, the Fibaro (which I prefer) can use an alternate power source. That's great!
Thanks!
Yes, the Fibaro (which I prefer) can use an alternate power source. That's great!
Thanks!
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
What roller blinds do you use for this? In my last search I couldn't find any with the correct tube size...
Re: Motor control for 12V motorized roller blinds
I asked them about that. The "Universal Rollertrol Motor" should even fit into a typical Ikea roller blind.
I think I'll order one and test it.
(I also want to test some RFXCOM controllable blinds from Hasta.se that Bert tipped me of, but apparently it is some work to find a Norwegian retailer).
I think I'll order one and test it.
(I also want to test some RFXCOM controllable blinds from Hasta.se that Bert tipped me of, but apparently it is some work to find a Norwegian retailer).
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
I think you'll need the mini series, for an 18 mm tube. I'll give it a try, ordered one.
Re: Motor control for 12V motorized roller blinds
Oh, you are right. I'll check it out.
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
Odering failed, can't ship to the Netherlands. Have to wait for an reply.
http://rollertrol.com/DIY-make-remote-c ... from-blind < there it says you have to use the mini series for ikea blinds.
http://rollertrol.com/DIY-make-remote-c ... from-blind < there it says you have to use the mini series for ikea blinds.
Re: Motor control for 12V motorized roller blinds
They can ship, but you need to contact them. It's costing me a whopping $89 to have it sent to me.freakstar wrote:Odering failed, can't ship to the Netherlands. Have to wait for an reply.
But still cheaper than the other options...
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder
Re: Motor control for 12V motorized roller blinds
Damn that's a lot of money for shipping!!
Another (cheap) option is http://www.home4u-store.com/rohrmotoren ... 3_744.html, but I can't find suitable blinds for those motors.
Maybe we can combine our order(s)?
Another (cheap) option is http://www.home4u-store.com/rohrmotoren ... 3_744.html, but I can't find suitable blinds for those motors.
Maybe we can combine our order(s)?
Re: Motor control for 12V motorized roller blinds
Sure! But shipping in Europe isn't that much cheaper...freakstar wrote: Maybe we can combine our order(s)?
HSPro 2.5.0.60, X10 CM11, Z-wave Aeon Stick2, RFXCOM, Script Connector, BT connector, DI Connector, DooNetwork, HSTouch, Squeezebox plugin, iTach WF2IR & GC-100-6 with UltraGCIR, BLicon, DenonAVR, WebcamXP, Jon00s MaxiBee and Webpage builder