Dear all,
I have an issue with my Zwave setup containing about 25 nodes (mostly Fibaro) 2 zwave.me keys 1 remotec remote and a zwave stick S2 as primary and a offline secondary Stick S2 for my test HS3 setup. Im running 2.5.080 HS2 in production.
Since a week or 3 i have an issue with randomly assigned associations to 3 to 5 nodes in my setup. I assigned some associations for example to an Fibaro rgbw module, and about every 2 days (randomly) those associations disappear and randomly there where added several associations to this node. Even to nodes that do not exist in my network (node 144 etc.)
This affects about 4 modules in my zwave network and mostly the fibaro rgbw modules. Is my Zwave network corruspt, is my zwave stick causing this or homeseer?
someone else see this phenomenon also? What can be causing this and is there a solution to this issue?
Thanks in advance
Bart Bakels
Zwave randomly added associations issue
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Zwave randomly added associations issue
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Re: Zwave randomly added associations issue
Hi,
this still happens however it is only occuring on my rgbw modules. anyone?
regards
this still happens however it is only occuring on my rgbw modules. anyone?
regards
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC
Re: Zwave randomly added associations issue
Bart,
Let me investigate at home ... I also have the z-wave stick and the RGBW modules and am also experiencing odd things with the associations.
I use my own z-wave driver ... but since adding the module I wonder if I introduced a bug or the module introduced it
Greetings,
Gijs
Let me investigate at home ... I also have the z-wave stick and the RGBW modules and am also experiencing odd things with the associations.
I use my own z-wave driver ... but since adding the module I wonder if I introduced a bug or the module introduced it
Greetings,
Gijs
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Re: Zwave randomly added associations issue
Hi,
Hmm seems to be something todo with firmware..? What is your setup? Also homeseer and s2 stick? I logged several forum entrys. Here, homeseer forum and fibaro. In addition my supplier will create an incident with fibaro regarding this.
Regards
Bart
Hmm seems to be something todo with firmware..? What is your setup? Also homeseer and s2 stick? I logged several forum entrys. Here, homeseer forum and fibaro. In addition my supplier will create an incident with fibaro regarding this.
Regards
Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC
Re: Zwave randomly added associations issue
Setup is an aeon labs z-stick (v1) and a home made z-wave driver. Sending the associations GET command gives me different results each time (and also associations which I didn't expect...).
Regards
Regards
-
- Advanced Member
- Posts: 515
- Joined: Tue May 31, 2011 6:44 pm
- Contact:
Re: Zwave randomly added associations issue
Still same issues here mostly after 3 days those strange associations appear when performing a network audit.
Hopefully fibaro has the solution...
Regards
Bart
Hopefully fibaro has the solution...
Regards
Bart
Software: HS3, HStouch, Plugwise , BLBackup, BLLatestImage, Zwave, JowiHUE, PHlocation, Netcam, Harmony Plugin, ThinkingCleaner, HSPhone, Eneco Toon Script, Pushover, Visonic Powermax LV Interface
(ON ESXI )on NUC
(ON ESXI )on NUC