Hi,
I bought two powernodes (6 ports) Nuon aka Greenwave.
They have different firmware versions and the settings are different as well in openzwave control panel (see attached photo).
The problem I have is that I can't reset the values like the other powernode and also a lot of unknowns are there
Is there a way to put a new firmware on there?
Regards,
Bjorn
GreenWave Unknown (powernode)
GreenWave Unknown (powernode)
- Attachments
-
- Capture.JPG (69.45 KiB) Viewed 11164 times
Re: GreenWave Unknown (powernode)
140 views..... no one?
Re: GreenWave Unknown (powernode)
You cannot update the firmware of the Greenwave Powernodes. Why would you want that ?
You can lookup how to configure them elsewere in this forum. The most important setting is parameter 1 the no communication timeout in minutes. If you do not poll the device before this timer times out, the big green light around the mains switch starts flashing.
Gert
You can lookup how to configure them elsewere in this forum. The most important setting is parameter 1 the no communication timeout in minutes. If you do not poll the device before this timer times out, the big green light around the mains switch starts flashing.
Gert
Re: GreenWave Unknown (powernode)
I understand but why do I have no totals with node8 while I have them with node7.
Also I have different Library/ Protocol and Application versions between node7 and node8
Also I have different Library/ Protocol and Application versions between node7 and node8
Re: GreenWave Unknown (powernode)
Also I can not read the configuration out of node8.
I will reset the device maybe that will help
I will reset the device maybe that will help
Re: GreenWave Unknown (powernode)
Do you have a copy of your zwcfg*xml? Then I can compare it with my powernodes (i got both 1 and 6 port versions).
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)
Re: GreenWave Unknown (powernode)
Hi,
I'm using domoticz and I assume it is in the Config directory
Attached the file
Regards,
Bjorn
I'm using domoticz and I assume it is in the Config directory
Attached the file
Regards,
Bjorn
- Attachments
-
- zwcfg_0x0161d745.zip
- (3.43 KiB) Downloaded 472 times
Re: GreenWave Unknown (powernode)
Hoi,
Heb het al opgelost
Aan de hand van http://www.domotiga.nl/projects/domotig ... _OpenZWave (Unknown device in Z-Wave Commander):
<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>
is nu:
<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
<Product type="0003" id="0006" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>
Heb het al opgelost
Aan de hand van http://www.domotiga.nl/projects/domotig ... _OpenZWave (Unknown device in Z-Wave Commander):
<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>
is nu:
<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
<Product type="0003" id="0006" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>
Re: GreenWave Unknown (powernode)
Can you open a ticket with open-zwave, that they add this combination to their xml file? Else it is lost during every upgrade ... and you are helping other people too.
https://code.google.com/p/open-zwave/issues/list
And click on "New issue"
https://code.google.com/p/open-zwave/issues/list
And click on "New issue"
DomotiGa / Z-Wave / RFXCom / Visonic PowerMaster / Home Assistant / Zigbee2MQTT / DSMR Reader / Toon1 (rooted)