GreenWave Unknown (powernode)

[FoRMaTC]

Hi,

I bought two powernodes (6 ports) Nuon aka Greenwave.
They have different firmware versions and the settings are different as well in openzwave control panel (see attached photo).

The problem I have is that I can't reset the values like the other powernode and also a lot of unknowns are there
Is there a way to put a new firmware on there?

Regards,

Bjorn

[FoRMaTC]

140 views..... no one?

[GertK]

You cannot update the firmware of the Greenwave Powernodes. Why would you want that ?
You can lookup how to configure them elsewere in this forum. The most important setting is parameter 1 the no communication timeout in minutes. If you do not poll the device before this timer times out, the big green light around the mains switch starts flashing.

Gert

[FoRMaTC]

I understand but why do I have no totals with node8 while I have them with node7.
Also I have different Library/ Protocol and Application versions between node7 and node8

[FoRMaTC]

Also I can not read the configuration out of node8.
I will reset the device maybe that will help

[uAlex73]

Do you have a copy of your zwcfg*xml? Then I can compare it with my powernodes (i got both 1 and 6 port versions).

[FoRMaTC]

Hi,

I'm using domoticz and I assume it is in the Config directory
Attached the file

Regards,

Bjorn

[FoRMaTC]

Hoi,

Heb het al opgelost

Aan de hand van http://www.domotiga.nl/projects/domotig ... _OpenZWave (Unknown device in Z-Wave Commander):

<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>

is nu:

<Manufacturer id="0099" name="GreenWave">
<Product type="0002" id="0002" name="PowerNode 1 port" config="greenwave/powernode1.xml"/>
<Product type="0003" id="0004" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
<Product type="0003" id="0006" name="PowerNode 6 port" config="greenwave/powernode6.xml"/>
</Manufacturer>

[uAlex73]

Can you open a ticket with open-zwave, that they add this combination to their xml file? Else it is lost during every upgrade ... and you are helping other people too.

https://code.google.com/p/open-zwave/issues/list
And click on "New issue"