I have 3 Vision Smoke Detectors in a Z-Wave network with an iHome controller. I wonder if I could interconnect these 3 smoke connectors. If one detects smoke I would like to fire off all alarms.
Anybody an idea how to realize this ?
Thanks
How to interconnect Z-Wave Vision Smoke detectors?
-
- Starting Member
- Posts: 3
- Joined: Tue Mar 25, 2014 11:37 pm
-
- Starting Member
- Posts: 7
- Joined: Sat Nov 10, 2012 3:05 pm
- Location: Amsterdam, Netherlands
- Contact:
Re: How to interconnect Z-Wave Vision Smoke detectors?
no, it is not possible to interact between the vision smoke detectors as they are always in 'sleep' mode and only awake once per day.
What I suggest is you can combine the smoke sensors with an AlarmSound unit from benext or from any other manufacturer which is always powered (=listening) and can be turned on/off directly when smoke is detected.
What I suggest is you can combine the smoke sensors with an AlarmSound unit from benext or from any other manufacturer which is always powered (=listening) and can be turned on/off directly when smoke is detected.