Arduino based plugs and wall switches

All about Arduino, Jeenode and other Clones (hardware & Software)

Moderator: Mdamen

Post Reply
veseo
Starting Member
Starting Member
Posts: 5
Joined: Wed Apr 02, 2014 4:19 pm

Arduino based plugs and wall switches

Post by veseo »

Hi,

is there any device like a ZWave plug or wall switch that is empowered with Arduino?

Regards,
Dario.
Regards,
Dario.

Souliss - Opensource Distributed Home Automation and Internet of Things
http://www.souliss.net
emvee
Starting Member
Starting Member
Posts: 24
Joined: Sat Jan 18, 2014 1:42 pm

Re: Arduino based plugs and wall switches

Post by emvee »

Guessing you want to use Arduino because you like to build things yourself, the Dimmer-Arduino could be a good start.

It looks like there is no ArduinoPlug (like the SheevaPlug) but on the other hand, if you like to use Arduino, some wiring and soldering should be part of the job.
veseo
Starting Member
Starting Member
Posts: 5
Joined: Wed Apr 02, 2014 4:19 pm

Re: Arduino based plugs and wall switches

Post by veseo »

Hi,

thanks for your answer. Yes Arduino users are supposed to wire something, but there will be a market for devices that will allow people to have products based on their DIY developments. That's why I'm asking if someone knows about.

Regards,
Dario.
Regards,
Dario.

Souliss - Opensource Distributed Home Automation and Internet of Things
http://www.souliss.net
Post Reply

Return to “Raspberry, Arduino, Cubietruck and other clones Forum”